Topaz came with a 120 volt cooling system but was very old.
The ice box is very large so I put three layers of 1 inch insulation on the bottom (since I couldn't reach the bottom anyway) two layer on the starboard side and one layer on the sides (two in the freezer area. I also cut out and area on top and made a freezer.

This area will also hold the cool blue holding plate with air moving into the refer area. hope it works.

I also made a bottom and divider for the freezer using 2 layers (4 layers on the bottom) of 1 inch foam and fiberglassed them together

I am putting plastic over the insulation and filling the seems with 5200

I am still working on it and should be done in a week ready for the cool blue


Popular Posts