9-5-19
 |
old heat exchanger |
 |
heat exchanger painted |
I took off the heat exchanger to clean it, used barnacle buster and let it soak for 24 hours then used a pressure washer to blow it out. also added a new zinc. One of the ends had a small crack in it so I used a brazing rod to fix it, I ended up burning a hole in it so I used the brazing rod to fix that then grinder it pretty smooth, I guess I fixed it, hope anyway. Used a gasket mixture to seal the ends, should work. the gasket material takes 24 hours to set up, so i'll guess I'll wait
also, added a step just above swim platform to help climbing back on board
Comments
Post a Comment